INTRODUCTION INDUCTION SOURCES OF LIGHT AN INDUSTRIAL LIGHTING
Keywords:
induction lamp, light source, industrial lighting, light beam, emergency lightingAbstract
The results of technical analysis data induction lamps made in China, made a comparative evaluation of direct replacement of high pressure discharge lamps to induction light sources and identified key areas for further application of induction lamps in industrial lighting. However, the use of cost-effective automation facilities, significant savings can be achieved by upgrading the lighting system of the company - an integral part of the working environment of any production room. There are lights that are now equal, and perhaps better specifications than the LEDs and their cheaper. This induction light source. According to the manufacturers achieve energy savings by using induction lighting in an industrial plant pretty simple only by direct substitution of lamps with modern induction that work better and last longer. When conducting a comparative assessment of different types of lighting, the analysis capabilities and direct replacement metalhalid and sodium high-pressure lamp for induction lamps (as stated Manufacturers induction lamps). The analysis showed that the power induction lamps for direct replacement of high-pressure lamp is replaceable lamp power, and in some cases exceed the nominal value. This in turn leads to an increase in the number of lighting devices for the normalized value of light on the work surface, and in some cases 2 times. Major industrial buildings have high ceilings (height mounting fixtures 10-30 m). Creating standardized light 200 lux, which corresponds to category VI visual works major industrial plants, perhaps not by direct replacement light sources in such areas. In industrial lighting Induction lamps and LEDs as an excellent alternative to create the necessary conditions in the event of an emergency, for emergency lighting normalized level is much lower than for desktop lighting.
Downloads
Published
How to Cite
Issue
Section
License
The authors that are published in this journal agree with the following terms:
- The authors reserve the right of authorship of his work and pass to the journal the right of first publication of this work is licensed under a Creative Commons Attribution License, which allows others to freely distribute published work with reference to authors of original works and works first published in this journal.
- The authors have the right to enter into a separate additional agreement for non-exclusive distribution of work in the form in which it was published in the magazine (for example, to place work in electronic storage agencies or publish as part of the monograph), providing the reference to the first publication in this journal.
- Journal policy allows and encourages the placement by the authors on the Internet (eg, in storage facilities or personal websites) the manuscript of the works before the submission of the manuscript to the editor as well as during its editorial processing, as it contributes to productive scientific discussion and has a positive impact on efficiency and dynamics citing published work (see. The Effect of Open Access).