Numerical Investigation of Three-Dimensional Hydrodynamics and Heat Transfer in a Hot-Water Boiler During the Combustionof Heterogeneous Fuel Pellets

Authors

  • Artur Rachynskyi National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” image/svg+xml
  • Oleksandr Baraniuk National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” image/svg+xml
  • Andrii Onysko National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” image/svg+xml
  • Olesia Drachuk National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” image/svg+xml

DOI:

https://doi.org/10.33042/2079-424X.2026.65.3.02

Keywords:

Hot-Water Boiler, Biomass, Fuel Pellets, CFD Modeling, Hydrodynamics, Turbulence, Heat Transfer

Abstract

Global trends toward energy decarbonization and energy efficiency enhancement drive the large-scale transition of small-scale municipal thermal power engineering to renewable energy sources, particularly biomass. The rapid development of the fuel pellet market has expanded the raw material range from traditional wood pellets to heterogeneous agro-pellets and municipal waste. However, switching to alternative fuels poses risks of slagging, efficiency degradation, and local thermal overloading of equipment. Traditional empirical calculation methods fail to account for the complex three-dimensional aerodynamics and diffusion-kinetic combustion characteristics of alternative biomass. For instance, flame instability and uneven heat absorption by waterwalls can reduce boiler reliability by 15…20 %. This highlights the urgency of implementing computational fluid dynamics (CFD) methods to evaluate operational regime stability. This study aims to investigate the influence of the physicochemical properties of six fuel pellet types on three-dimensional hydrodynamics, turbulent structure, temperature fields, and heat transfer in a 50 kW Feniks hot-water boiler. This is achieved through numerical CFD modeling in ANSYS Fluent using the RANS approach, the Realizable k- turbulence model, the Lagrangian Discrete Phase Model (DPM), and the Discrete Ordinates radiation model. As a result, the study demonstrates that the geometric configuration of the boiler provides high aerodynamic versatility (flame velocity variation does not exceed 3,3 %). The model validity is confirmed by the agreement between the calculated flame temperatures and adiabatic values (with a deviation of less than 8 %). The obtained results and calculated spatial fields can be utilized to optimize pellet boiler designs and evaluate their environmental performance.

Author Biographies

  • Artur Rachynskyi, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”

    PhD in Engineering, Associate Professor
    Department of Thermal and Alternative Energy

  • Oleksandr Baraniuk, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”

    PhD in Engineering, Associate Professor
    Department of Thermal and Alternative Energy

  • Andrii Onysko, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”

    PhD in Military Sciences, Associate Professor
    Department of Digital Technologies in Energy

  • Olesia Drachuk, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”

    Assistant
    Department of Automation and Non-Destructive Testing Systems

References

1. Kinefuchi E. Burning forests: the wood pellet industry's framing of sustainability and its shadow places. Frontiers in Communication. 2024. Vol. 9. Art. 1237141. DOI: https://doi.org/10.3389/fcomm.2024.1237141.

2. Kang S. B., Sim B. S., Kim J. J. Volume and Mass Measurement of a Burning Wood Pellet by Image Processing. Energies. 2017. Vol. 10, no. 5. Art. 603. DOI: https://doi.org/10.3390/en10050603.

3. Kang S. B., Kim J. J., Choi K. S., Sim B. S., Oh H. Y. Development of a test facility to evaluate performance of a domestic wood pellet boiler. Renewable Energy. 2013. Vol. 54. P. 2–7. DOI: https://doi.org/10.1016/j.renene.2012.11.007.

4. Zhovmir M. M. Carbon burnout from the char of a single cylindrical pellet. Energetika. 2023. Vol. 68, no. 1. P. 1–12. DOI: https://doi.org/10.6001/energetika.v68i1.4852.

5. Biomass briquette fuel, boiler types and pollutant emissions of industrial biomass boiler: A review / H. Huang et al. Particuology. 2022. Vol. 77, no. 3. P. 110–123. DOI: https://doi.org/10.1016/j.partic.2022.08.016.

6. Ahn J., Kim H. J. Combustion Process of a Korean Wood Pellet at a Low Temperature. Renewable Energy. 2019. Vol. 145. P. 1361–1369. DOI: https://doi.org/10.1016/j.renene.2019.05.031.

7. Biomass pellet combustion: Cavities and ash formation characterized by synchrotron X-ray micro-tomography / A. Strandberg et al. Fuel Processing Technology. 2018. Vol. 176. P. 110–117. DOI: https://doi.org/10.1016/j.fuproc.2018.03.023.

8. Experimental study of PM emissions from wood pellet stoves with an innovative burning pot / L. F. Polonini et al. Journal of Physics: Conference Series. 2019. Vol. 1224, no. 1. Art. 012018. DOI: https://doi.org/10.1088/1742-6596/1224/1/012018.

9. Influence of physical and chemical compositions on the properties and energy use of lignocellulosic biomass pellets in Brazil / S. B. Silva et al. Renewable Energy. 2019. Vol. 147. P. 1870–1879. DOI: https://doi.org/10.1016/j.renene.2019.09.131.

10. Holistic thermoenergetic assessment of biomass boilers: An integrated static, dynamic, and emergy framework / E. O. Cajusol Pingo et al. Biomass. 2026. Vol. 6, no. 3. Art. 46. DOI: https://doi.org/10.3390/biomass6030046.

11. Recovery of agricultural and wood wastes: The effect of biomass blends on the quality of pellets / M. A. Brand et al. Fuel. 2021. Vol. 284. Art. 118881. DOI: https://doi.org/10.1016/j.fuel.2020.118881.

12. Feasibility study on direct co-firing of typical biomass types in coal-fired circulating fluidized bed boilers / H. Zhang et al. Energies. 2026. Vol. 19, no. 6. Art. 1492. DOI: https://doi.org/10.3390/en19061492.

13. Thermal and emission performance of fuel-based decarbonization strategies in coal-fired boilers / N. A. W. Mohd Noor et al. SSRN Electronic Journal. 2026. DOI: https://doi.org/10.2139/ssrn.6465840.

14. Zhang H., Yu C. Experimental study on co-firing of coal and biomass in industrial-scale circulating fluidized bed boilers. Energies. 2025. Vol. 18, no. 14. Art. 3832. DOI: https://doi.org/10.3390/en18143832.

15. Research on pollutant emission characteristics of typical biomass-fired boilers / W. Zhang et al. E3S Web of Conferences. 2024. Vol. 536. Art. 03003. DOI: https://doi.org/10.1051/e3sconf/202453603003.

16. Uliasz-Bocheńczyk A., Mokrzycki E. Bottom ash from biomass combustion in fluidized bed boilers in the context of the circular economy. Energies. 2026. Vol. 19, no. 3. Art. 630. DOI: https://doi.org/10.3390/en19030630.

17. Uliasz-Bocheńczyk A., Pawluk A., Pyzalski M. Characteristics of ash from the combustion of biomass in fluidized bed boilers. Gospodarka Surowcami Mineralnymi – Mineral Resources Management. 2016. Vol. 32, no. 3. P. 149–162. DOI: https://doi.org/10.1515/gospo-2016-0029.

18. CFD analysis of coal and biomass co-firing characteristics in a tangentially fired boiler / L. Liu et al. Energies. 2026. Vol. 19, no. 13. Art. 3118. DOI: https://doi.org/10.3390/en19133118.

19. Silva J., Teixeira S. F. C. F., Teixeira J. Development of a CFD model to study the fundamental phenomena associated with biomass combustion in a grate-fired boiler. Processes. 2025. Vol. 13, no. 8. Art. 2617. DOI: https://doi.org/10.3390/pr13082617.

20. Corrosion and erosion risks in biomass–coal cofiring boilers: A CFD-based safety assessment of a 660 MW tangentially fired boiler / Y. Tian et al. Energies. 2026. Vol. 19, no. 13. Art. 3080. DOI: https://doi.org/10.3390/en19133080.

21. Demirbaş A. Potential applications of renewable energy sources, biomass combustion problems in boiler power systems and combustion related environmental issues. Progress in Energy and Combustion Science. 2005. Vol. 31, no. 2. P. 171–192. DOI: https://doi.org/10.1016/j.pecs.2005.02.002.

Downloads

Published

2026-10-20

Issue

Vol. 65 No. 3 (2026): Lighting Engineering & Power Engineering

Section

Power Engineering

License

Copyright (c) 2026 Lighting Engineering & Power Engineering

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

The fact of the author's acceptance of the terms and conditions hereof is that the author sends his/her materials for publication in the Licensee's journals.

BY THIS AGREEMENT, THE AUTHOR SHOWS THAT THE SUBMITTED MATERIAL:

  • does not infringe the copyrights of other persons or organizations;
  • has not been previously published in other journals and has not been submitted for publication in other journals.

THE RIGHTS THAT THE AUTHOR TRANSFERS TO THE EDITORIAL BOARD OF LIGHTING ENGINEERING & POWER ENGINEERING, INCLUDE, IN PARTICULAR, THE RIGHTS:

  • to publish the article in English and distribute its printed version;
  • to distribute the electronic version of the article by any electronic means (placement on the official website of the journal, in electronic databases, repositories, etc.).

The author reserves all rights under the terms of the Creative Commons Attribution License International CC-BY.

In all cases, the presence of a bibliographic link to an article or a hyperlink to its electronic copy on the official website of the journal is mandatory.

Public Agreement On the Procedure for Publishing Author’s Articles

How to Cite

Numerical Investigation of Three-Dimensional Hydrodynamics and Heat Transfer in a Hot-Water Boiler During the Combustionof Heterogeneous Fuel Pellets. (2026). Lighting Engineering & Power Engineering, 65(3), 159-168. https://doi.org/10.33042/2079-424X.2026.65.3.02