DESIGN OF LIGHTING EMITTING DIODE INDESTRIAL LUMINAIRE

Authors

  • В. П. Квасніков
  • Н. І. Кулик

Keywords:

LED lighting appliance, industrial lamp, the method of reverse ray.

Abstract

In this article reviewed most popular methods for designing LED devises. Some features of LED lighting was considered. The problem is that the LED has a very complex photometric body that can not be replaced by substitutes geometrical important error. Using computer modeling necessary to clarify the source data , which in future will be used to create a mathematical model. Manufacturers also provide only data on the distribution of intensity in space. The calculation was taken assumption of smallness point luminous body. To create the model was selected LED XHP 50 firms CREE (USA) with warm white light. Select the shape of the reflector is based on the drawings reflector Ledil Mirella- 50 -s-pin, provided by the manufacturer. In TracePro software environment based on drawings were executed reflective element model. The form received a reflector as close to drawing Ledil Mirella- 50 -s-pin. As a result of ray tracing of source Cree XHP 50 ww received intensity curve, coinciding with a slight deviation from the curve of the manufacturer. Mathematical model of lights was made on the basis of the model parameters and characteristics of reflector light source optimized computational . Calculations were made in the software environment of Mathematica. For the mathematical modeling of light distribution was selected inverse beam , as it has a high accuracy calculations, and there is no need to incorporate multiple perevidbyvannya rays. As a result, received a narrow beam of light rays with an angle of half- intensity 10 . The results in the form of light distribution coincides with the manufacturer presented with some deviation.

Downloads

Published

2016-08-05

How to Cite

Квасніков, В. П., & Кулик, Н. І. (2016). DESIGN OF LIGHTING EMITTING DIODE INDESTRIAL LUMINAIRE. Lighting Engineering & Power Engineering, (1), 46–50. Retrieved from https://lepe.kname.edu.ua/index.php/lepe/article/view/351

Issue

No. 1 (2016): №45

Section

Articles

License

The authors that are published in this journal agree with the following terms:

  • The authors reserve the right of authorship of his work and pass to the journal the right of first publication of this work is licensed under a Creative Commons Attribution License, which allows others to freely distribute published work with reference to authors of original works and works first published in this journal.
  • The authors have the right to enter into a separate additional agreement for non-exclusive distribution of work in the form in which it was published in the magazine (for example, to place work in electronic storage agencies or publish as part of the monograph), providing the reference to the first publication in this journal.
  • Journal policy allows and encourages the placement by the authors on the Internet (eg, in storage facilities or personal websites) the manuscript of the works before the submission of the manuscript to the editor as well as during its editorial processing, as it contributes to productive scientific discussion and has a positive impact on efficiency and dynamics citing published work (see. The Effect of Open Access).