The Speed Stabilization System of Electromechanical Energy Converters in ANSYS Twin Builder
DOI:
https://doi.org/10.33042/2079-424X.2022.61.2.03Keywords:
Electromechanical Energy Converter, ANSYS Maxwell, ANSYS Twin Builder, Coupling Project, Co-simulation, FOC, Speed Control, Current Control, PLLAbstract
The paper is devoted to solving the problem of building a control system for a special electromechanical energy converter, which is due to the inverted structure of the stator and the presence of a solid hollow rotor made of ferromagnetic steel. The task of the control system is to ensure the speed of the rotor's run-up to a given value in a certain time and then maintain it regardless of load fluctuations. The task was solved due to the implementation of Field Oriented Control (FOC) vector control with speed and current controllers and a phase locked loop (PLL). Despite the fact that from the point of view of the electric drive theory, the given task is not new, its solution using only ANSYS Twin Builder blocks is being solved for the first time. The peculiarity of this work is that the electromechanical converter in ANSYS Twin Builder is not presented in the form of a mathematical model and electric machine blocks built into the Twin Builder library, but through the solution of the ANSYS Maxwell 2D/3D coupling project and the ANSYS Twin Builder solver with co simulation, which significantly increases the quality of calculations. The obtained results will be useful for solving similar problems for other types of electric machines, not only for the considered electromechanical converter of the asynchronous type with a solid rotor.
References
Barambones, O., Garrido, A.J., Maseda, F.J., & Alkorta, P. (2006). An adaptive sliding mode control law for induction motors using field oriented control theory. In 2006 IEEE Conference on Computer Aided Control System Design, 2006 IEEE International Conference on Control Applications, 2006 IEEE International Symposium on Intelligent Control (pp. 1008–1013). IEEE. https://doi.org/10.1109/CACSD-CCA-ISIC.2006.4776782
Amin, F., Sulaiman, E., & Soomro, H.A. (2019). Field oriented control principles for synchronous motor. International Journal of Mechanical Engineering and Robotics Research, 8(2), 284–288. https://doi.org/10.18178/ijmerr.8.2.284-288
Rafetseder, D., & Amrhein, W. (2017). Control and evaluation of a double-stator linear induction machine with reciprocating cage mover. In 2017 IEEE International Electric Machines and Drives Conference (IEMDC) (pp. 1–8). IEEE. https://doi.org/10.1109/IEMDC.2017.8001999
Han, C. (2015). Simulation of the electromagnetic field for the moving magnet. In The 27th Chinese Control and Decision Conference (2015 CCDC) (pp. 5635–5638). IEEE. https://doi.org/10.1109/CCDC.2015.7161805
Sira-Ramírez, H., González-Montañez, F., Cortés-Romero, J.A., & Luviano-Juárez, A. (2012). A robust linear field-oriented voltage control for the induction motor: experimental results. IEEE Transactions on Industrial Electronics, 60(8), 3025–3033. https://doi.org/10.1109/TIE.2012.2201430
Paulus, D., Stumper, J.F., & Kennel, R. (2012). Sensorless control of synchronous machines based on direct speed and position estimation in polar stator-current coordinates. IEEE Transactions on Power Electronics, 28(5), 2503–2513. https://doi.org/10.1109/TPEL.2012.2211384
Tabbache, B., Rizoug, N., Benbouzid, M.E.H., & Kheloui, A. (2012). A control reconfiguration strategy for post-sensor FTC in induction motor-based EVs. IEEE transactions on vehicular technology, 62(3), 965–971. https://doi.org/10.1109/TVT.2012.2232325
Chandrakars, A., Ch, S., Sonti, V., & Jain, S. (2022). Gradual pole changing based field oriented control technique for pole-phase modulated induction motor drive. In 2022 IEEE 2nd International Conference on Sustainable Energy and Future Electric Transportation (SeFeT) (pp. 1–5). IEEE. https://doi.org/10.1109/SeFeT55524.2022.9909117
Shen, Z., Mo, J., Chen, K., & Pan, J. (2022). Performance analysis and control of dual-stator motor in cooperative robots. In 2022 IEEE 9th International Conference on Power Electronics Systems and Applications (PESA) (pp. 1–4). IEEE. https://doi.org/10.1109/PESA55501.2022.10038421
Iturra, R.G., & Thiemann, P. (2021). Sensorless Field oriented control of PMSM using direct flux control with improved measurement sequence. In 2021 XVIII International Scientific Technical Conference Alternating Current Electric Drives (ACED) (pp. 1–6). IEEE. https://doi.org/10.1109/ACED50605.2021.9462276
Liu, S., Xiong, Z., Zhang, H., Li, X., & Yang, J. (2020). Analysis of field circuit combination of GIS switching over-voltage. In 2020 5th Asia Conference on Power and Electrical Engineering (ACPEE) (pp. 2204–2208). IEEE. https://doi.org/10.1109/ACPEE48638.2020.9136189
Hasan, M.M., Hussain, M.S., Rana, M.S., & Roni, M.H.K. (2021). Population extremal optimization based 2-DOF control strategy for field oriented control of induction motor. In 2021 3rd International Conference on Electrical & Electronic Engineering (ICEEE) (pp. 117–120). IEEE. https://doi.org/10.1109/ICEEE54059.2021.9718799
Lin, H., Hu, B., Li, F., Chen, J., Si, L., Zhou, X., ... & Dong, Y. (2018). A fault-tolerant two-permanent magnet synchronous motor drive with field-oriented control scheme. In 2018 2nd IEEE Advanced Information Management, Communicates, Electronic and Automation Control Conference (IMCEC) (pp. 1029–1033). IEEE. https://doi.org/10.1109/IMCEC.2018.8469343
Tomy, N.M., & Francis, J. (2016). Field oriented sensorless position control of a hybrid stepper motor with extended Kalman filter. In 2016 10th International Conference on Intelligent Systems and Control (ISCO) (pp. 1–5). IEEE. https://doi.org/10.1109/ISCO.2016.7727056
Shah, V. (2017). FPGA implementation of sensorless field oriented current control of induction machine. In 2017 IEEE International Conference on Computational Intelligence and Computing Research (ICCIC) (pp. 1–5). IEEE. https://doi.org/10.1109/ICCIC.2017.8524311
Liu, Y., Tao, G., Wang, H., & Blaabjerg, F. (2017). Analysis of indirect rotor field oriented control-based induction machine performance under inaccurate field-oriented condition. In IECON 2017-43rd Annual Conference of the IEEE Industrial Electronics Society (pp. 1810–1815). IEEE. https://doi.org/10.1109/IECON.2017.8216306
Khamis, A.A., Abbas, A.M., & ALgoul, M.A. (2022). Comparative study between a novel direct torque control and indirect field oriented control of three-phase induction motors. In 2022 IEEE 2nd International Maghreb Meeting of the Conference on Sciences and Techniques of Automatic Control and Computer Engineering (MI-STA) (pp. 75–80). IEEE. https://doi.org/10.1109/MISTA54861.2022.9837649
ANSYS Inc. (2012). ANSYS Maxwell 3D v.15 – Electromagnetic and Electromechanical Analysis: User’s Guide. ANSYS Inc.
Kassa, M.T., & Changqing, D. (2021). Design optimazation and simulation of PMSM based on Maxwell and Twin Builder for EVs. In 2021 8th International Conference on Electrical and Electronics Engineering (ICEEE) (pp. 99–103). IEEE. https://doi.org/10.1109/ICEEE52452.2021.9415922
Hang, B., Wang, Q., Xie, F., & Shi, L. (2016). Cosimulation of field oriented control in induction motor drive system. In 2016 IEEE 11th Conference on Industrial Electronics and Applications (ICIEA) (pp. 1955-1958). IEEE. https://doi.org/10.1109/ICIEA.2016.7603908
Gaeta, A., Scelba, G., & Consoli, A. (2012). Modeling and control of three-phase PMSMs under open-phase fault. IEEE Transactions on Industry Applications, 49(1), 74–83. https://doi.org/10.1109/TIA.2012.2228614
Bashir, I., & Bhat, A.H. (2022). Design and performance evaluation of switched reluctance motor using ANSYS Electronics Desktop. In 2022 1st International Conference on Sustainable Technology for Power and Energy Systems (STPES) (pp. 1–6). IEEE. https://doi.org/10.1109/STPES54845.2022.10006469
Raj, A., & Sreekanth, P.K. (2017). Modelling and simulation of SRM based automatic transmission system for hybrid vehicles in Ansys Maxwell. In 2017 International Conference on Circuit, Power and Computing Technologies (ICCPCT) (pp. 1–6). IEEE. https://doi.org/10.1109/ICCPCT.2017.8074301
Laldingliana, J., Debnath, S., & Biswas, P.K. (2018). Analysis of a single actuator double winding active magnetic bearing (AMB) using Ansys Maxwell simulation software. In 2018 2nd International Conference on Power, Energy and Environment: Towards Smart Technology (ICEPE) (pp. 1–6). IEEE. https://doi.org/10.1109/EPETSG.2018.8659141
Patil, S., & Saxena, R. (2022). Design & simulation of brushless DC motor using ANSYS for EV application. In 2022 IEEE International Students' Conference on Electrical, Electronics and Computer Science (SCEECS) (pp. 1–5). IEEE. https://doi.org/10.1109/SCEECS54111.2022.9740973
Pliugin, V., Petrenko, O., Grinina, V., Grinin, O., & Yehorov, A. (2017). Imitation model of a high-speed induction motor with frequency control. Electrical Engineering & Electromechanics, 6, 14–20. https://doi.org/10.20998/2074-272X.2017.6.02
Pliuhin, V., Zablodskiy, M., Tsegelnyk, Y., & Slovikovskyi, O. (2022). Development of imitation model of an electromechanical energy converter with a solid rotor in ANSYS RMxprt, Maxwell and Twin Builder. Lighting Engineering & Power Engineering, 61(1), 21–29. https://doi.org/10.33042/2079-424X.2022.61.1.03
Hughes, A., & Drury, B. (2019). Electric Motors and Drives. Newnes. https://doi.org/10.1016/C2017-0-03226-3
Novotny, D.W., & Lipo, T.A. (1996). Vector Control and Dynamics of AC Drives. Oxford University Press.
Mersha, T.K., & Du, C. (2021). Co-simulation and modeling of PMSM based on ANSYS software and Simulink for EVs. World Electric Vehicle Journal, 13(1), 4. https://doi.org/10.3390/wevj13010004
Tsai, M.F., Tseng, C.S., & Lin, B.Y. (2020). Phase voltage-oriented control of a PMSG wind generator for unity power factor correction. Energies, 13(21), 5693. https://doi.org/10.3390/en13215693
Zhang, G., Li, K., & Liu, C. (2018). Simulation of permanent magnet synchronous motor vector control
system based on Simplorer & Maxwell. In 2018 7th International Conference on Energy, Environment and Sustainable Development (ICEESD 2018) (pp. 1964–1969). Atlantis Press. https://doi.org/10.2991/iceesd-18.2018.349
Gobikha, G.S., & S.Allirani (2017). Space vector modulation based direct torque control of induction motor using Matlab- Simulink, Maxwell -Simplorer. International Journal of Scientific Research in Science, Engineering and Technology, 3, 191–195.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Lighting Engineering & Power Engineering
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The authors that are published in this journal agree with the following terms:
- The authors reserve the right of authorship of his work and pass to the journal the right of first publication of this work is licensed under a Creative Commons Attribution License, which allows others to freely distribute published work with reference to authors of original works and works first published in this journal.
- The authors have the right to enter into a separate additional agreement for non-exclusive distribution of work in the form in which it was published in the magazine (for example, to place work in electronic storage agencies or publish as part of the monograph), providing the reference to the first publication in this journal.
- Journal policy allows and encourages the placement by the authors on the Internet (eg, in storage facilities or personal websites) the manuscript of the works before the submission of the manuscript to the editor as well as during its editorial processing, as it contributes to productive scientific discussion and has a positive impact on efficiency and dynamics citing published work (see. The Effect of Open Access).