Design Methodology of a Multifunctional Screw-Type Energy Converter

Authors

  • Oleksandr Petrenko O.M. Beketov National University of Urban Economy in Kharkiv
  • Vladyslav Pliuhin O.M. Beketov National University of Urban Economy in Kharkiv

DOI:

https://doi.org/10.33042/2079-424X.2023.62.1.05

Keywords:

induction motor, solid rotor, external rotor, hollow rotor, screw, parameters, design

Abstract

This paper examines the method of designing a non-standard electric machine – a three-phase induction motor with a hollow solid rotor, on the surface of which the turns of the screw are located. Such an unusual design makes it possible to turn the main disadvantage of induction machines with a solid rotor, namely the heating of the rotor due to the effect of eddy currents, into an advantage. The heat from the rotor is transferred to the bulk material, which is mixed by the screw, for drying and reducing the moisture content. At the same time, only one device is used to perform three functions - mixing, drying, transportation of bulk material, which, due to the specified functional features, was called a multifunctional energy converter (MEC). The MFEC design method differs from conventional machines, because it takes into account the peculiarities of determining the parameters of a number of typical methods: an induction motor with a squirrel-cage rotor, an induction motor with a solid internal rotor, and an inductor. In the previous publications of the authors, the complex methodology of designing an induction motor with an external solid rotor was considered in detail, however, in view of the additional theoretical and experimental studies conducted, it needs to be clarified and adjusted. In addition, in this paper, the beginning of the design, the determination of the initial data and the main dimensions of the MFEC is performed in a different way. In particular, the overall dimensions of the MFEC are determined not by the sum of power spent on heating and mixing the material and internal losses in an induction machine (considering the efficiency and power factor), but by the required performance of the unit and the limit dimensions of the installation area. The paper proposes a new approach to determining the dimensions of the stator slot, considering the necessary area for the placement of conductors and the current density in the winding. This paper is one of several publications that aim to reveal the features of design and mathematical modeling of such an atypical class of electric machines as an induction motor with an external hollow solid rotor.

Author Biographies

Oleksandr Petrenko, O.M. Beketov National University of Urban Economy in Kharkiv

D.Sc., Full Professor, department “Electric Transport”

Vladyslav Pliuhin, O.M. Beketov National University of Urban Economy in Kharkiv

D.Sc., Full Professor, the head of the department “Urban Electrical Energy Supply and Consumption Systems”

References

Zablodskij N. Submersible electromechanical transformers for energy efficient technologies of oil ex-traction / N. Zablodskiy, V. Pliugin, V. Gritsyuk // Progressive technologies of coal, coaled methane, and ores mining. – 2014 – P. 223 – 227. http://surl.li/mldtc

M. Zablodskiy, V. Gritsyuk, V. Pliuhin and I. Biletskyi, "The Surface Characteristics Features of The Electromagnetic Field of the Rotor of a Polyfunctional Electromechanical Converter," 2021 International Conference on Electrical, Computer, Communications and Mechatronics Motorering (ICECCME), 2021, pp. 1-5, https://doi.org/10.1109/ICECCME52200.2021.9590872

Zablodskiy, M. M., Pliuhin, V. E., Kovalchuk, S. I., & Tietieriev, V. O. (2022). Indirect field-oriented control of twin-screw electromechanical hydrolyzer. Electrical Motorering & Electromechanics, (1), 3–11. https://doi.org/10.20998/2074-272X.2022.1.01

Md Lokman Hosain, Rebei Bel Fdhila, Air-Gap Heat Transfer in Rotating Electrical Machines: A Parametric Study, Energy Procedia, Volume 142, 2017, Pages 4176-4181, https://doi.org/10.1016/j.egypro.2017.12.343

Rönnberg, K. (2020). Heat-transfer simulations applied to electrical machines (Licentiate dissertation, KTH Royal Institute of Technology). Retrieved from https://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-286686

Jörg Schemminger, Duncan Mbuge, Werner Hofacker, Ambient air cereal grain drying – Simulation of the thermodynamic and microbial behavior, Thermal Science and Motorering Progress, Volume 13, 2019, 100382, https://doi.org/10.1016/j.tsep.2019.100382

Wenkai Cheng, Sicheng Xin, Shichang Chen, Xianming Zhang, Wenxing Chen, Jiajun Wang, Lianfang Feng, Hydrodynamics and mixing process in a horizontal self-cleaning opposite-rotating twin-shaft kneader, Chemical Motorering Science, Volume 241, 2021, 116700, https://doi.org/10.1016/j.ces.2021.116700

Fenglei Qi, Theodore J. Heindel, Mark Mba Wright, Numerical study of ppaper mixing in a lab-scale screw mixer using the discrete element method, Powder Technology, Volume 308, 2017, Pages 334-345, https://doi.org/10.1016/j.powtec.2016.12.043

Zablodskij N. Dynamic Simulation of the Double-Stator Induction Electromechanical Converter with Ferromagnetic Rotor / N. Zablodskij, V. Pliugin, J. Lettl, S. Fligl // “Power Motorering”. – 2013. – P. 1448 – 1453. https://doi.org/10.1109/PowerEng.2013.6635828

Pliuhin, V., Plankovskyy, S., Zablodskiy, M., Biletskyi, I., Tsegelnyk, Y., Kombarov, V. (2023). Novel Features of Special Purpose Induction Electrical Machines Object-Oriented Design. In: Cioboată, D.D. (eds) International Conference on Reliable Systems Motorering (ICoRSE) - 2022. ICoRSE 2022. Lecture Notes in Networks and Systems, vol 534, Pp. 265-283. Springer, Cham. https://doi.org/10.1007/978-3-031-15944-2_25

Abhay Menon, Valentina Stojceska, Savvas A. Tassou, A systematic review on the recent advances of the energy efficiency improvements in non-conventional food drying technologies, Trends in Food Science & Technology, Volume 100, 2020, Pages 67-76, https://doi.org/10.1016/j.tifs.2020.03.014

Katarzyna Chojnacka, Katarzyna Mikula, Grzegorz Izydorczyk, Dawid Skrzypczak, Anna Witek-Krowiak, Konstantinos Moustakas, Wojciech Ludwig, Marek Kułażyński, Improvements in drying technologies - Efficient solutions for cleaner production with higher energy efficiency and reduced emission, Journal of Cleaner Production, Volume 320, 2021, 128706, https://doi.org/10.1016/j.jclepro.2021.128706

Sobulska M, Wawrzyniak P, Woo MW. Superheated Steam Spray Drying as an Energy-Saving Drying Technique: A Review. Energies. 2022; 15(22):8546. https://doi.org/10.3390/en15228546

Iryna Ablieieva, Nadiia Artyukhova, Jan Krmela, Myroslav Malovanyy & Dmytrii Berezhnyi (2022) Fluidized bed dryers in terms of minimizing environmental impact and achieving the sustainable development goals, Drying Technology, 40:8, 1598-1608, https://doi.org/10.1080/07373937.2022.2081174

Rafal Wrobel, A technology overview of thermal management of integrated motor drives – Electrical Machines, Thermal Science and Motorering Progress, Volume 29, 2022, 101222, https://doi.org/10.1016/j.tsep.2022.101222

Wang Q, Wu Y, Niu S, Zhao X. Advances in Thermal Management Technologies of Electrical Machines. Energies. 2022; 15(9):3249. https://doi.org/10.3390/en15093249

Manuel Burgos Payán, Juan Manuel Roldan Fernandez, Jose Maria Maza Ortega, Jesus Manuel Riquelme Santos, Techno-economic optimal power rating of induction motors, Applied Energy, Volume 240, 2019, Pages 1031-1048, https://doi.org/10.1016/j.apenergy.2019.02.016

Jingquan Guo, Xinqiang Ma, Ali Ahmadpour, Electrical–mechanical evaluation of the multi–cascaded induction motors under different conditions, Energy, Volume 229, 2021, 120664, https://doi.org/10.1016/j.energy.2021.120664

Detka K, Górecki K, Grzejszczak P, Barlik R. Modeling and Measurements of Properties of Coupled Inductors. Energies. 2021; 14(14):4088. https://doi.org/10.3390/en14144088

Rabia Melati, Azzedine Hamid, Lebey Thierry, Mokhtaria Derkaoui, Design of a new electrical model of a ferromagnetic planar inductor for its integration in a micro-converter, Mathematical and Computer Modelling, Volume 57, Issues 1–2, 2013, Pages 200-227, https://doi.org/10.1016/j.mcm.2011.06.014

Solmaz Kahourzade, Amin Mahmoudi, Emad Roshandel, Zhi Cao, Optimal design of Axial-Flux Induction Motors based on an improved analytical model, Energy, Volume 237, 2021, 121552, https://doi.org/10.1016/j.energy.2021.121552

Carbonieri M, Bianchi N. A Complete and Fast Analysis Procedure for Three-Phase Induction Motors Using Finite Element, Considering Skewing and Iron Losses. Applied Sciences. 2021; 11(5):2428. https://doi.org/10.3390/app11052428

J. F. Gieras and J. Saari, "Performance Calculation for a High-Speed Solid-Rotor Induction Motor," in IEEE Transactions on Industrial Electronics, vol. 59, no. 6, pp. 2689-2700, June 2012, https://doi.org/10.1109/TIE.2011.2160516

Jussi Huppunen. High-Speed Solid-Rotor Induction Machine – Electromagnetic Calculation and Design. Lappeenranta University of Technology, Lappeenranta, 2004. 168 p. https://lutpub.lut.fi/bitstream/handle/10024/36551/isbn9517649444.pdf?sequence=1&isAllowed=y

Vladyslav Pliuhin, Mykola Zablodskiy, Maria Sukhonos, Yevgen Tsegelnyk and Lidiia Piddubna. De-termination of Solid Rotary Electric Machines Parameters in ANSYS RMxprt and ANSYS Maxwell. STUE-2022 2023. Vol. 536. P. 189–201 https://doi.org/10.1007/978-3-031-20141-7_18

M. Aishwarya, R.M. Brisilla, Design of Energy-Efficient Induction motor using ANSYS software, Results in Motorering, Volume 16, 2022, 100616, https://doi.org/10.1016/j.rineng.2022.100616

Boldea, I., & Nasar, S.A. (2009). The Induction Machines Design Handbook (2nd ed.). CRC Press. https://doi.org/10.1201/9781315222592

Downloads

Published

2023-04-29

How to Cite

Petrenko, O., & Pliuhin, V. (2023). Design Methodology of a Multifunctional Screw-Type Energy Converter. Lighting Engineering & Power Engineering, 62(1), 28–36. https://doi.org/10.33042/2079-424X.2023.62.1.05

Issue

Vol. 62 No. 1 (2023): Lighting Engineering & Power Engineering

Section

Power Engineering

License

Copyright (c) 2023 Lighting Engineering & Power Engineering

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

The authors that are published in this journal agree with the following terms:

  • The authors reserve the right of authorship of his work and pass to the journal the right of first publication of this work is licensed under a Creative Commons Attribution License, which allows others to freely distribute published work with reference to authors of original works and works first published in this journal.
  • The authors have the right to enter into a separate additional agreement for non-exclusive distribution of work in the form in which it was published in the magazine (for example, to place work in electronic storage agencies or publish as part of the monograph), providing the reference to the first publication in this journal.
  • Journal policy allows and encourages the placement by the authors on the Internet (eg, in storage facilities or personal websites) the manuscript of the works before the submission of the manuscript to the editor as well as during its editorial processing, as it contributes to productive scientific discussion and has a positive impact on efficiency and dynamics citing published work (see. The Effect of Open Access).